Monday, July 16th, 2018

Time	Event
7:07a	Lockheed Martin Creates Its Largest 3D-Printed Space Part To Date Lockheed Martin has finished quality control tests for its largest 3D-printed space part to date: an enormous titanium dome meant to serve as caps for satellite fuel tanks. The component measures four feet in diameter. Engadget reports: Its previous largest qualified space part is an electronics enclosure that's around the size of a toaster. This dome is large enough to seal fuel tanks bigger than humans and, according to Lockheed Martin, big enough to hold 74.4 gallons of coffee or 530 donuts. Glazed, of course. Titanium is an ideal material for the industry, because it's lightweight and can withstand the harsh conditions of space travel. However, manufacturers end up wasting 80 percent of the material using traditional manufacturing techniques -- plus, each component could take years to build. Rick Ambrose, the company's executive VP, said they were able to cut down the total delivery timeline for a titanium fuel tank dome from two years to an incredibly impressive three months. "Our largest 3D-printed parts to date show we're committed to a future where we produce satellites twice as fast and at half the cost." Read more of this story at Slashdot. (Comment on this)
5:22p	Microsoft's Panos Panay Says Company is Exploring Several New Form Factors in Surface Category, But a Phone Isn't One of Them Speaking on the sidelines of the Surface Go launch, Microsoft's Panos Panay, who heads the Surface division, once again very much reiterated that the company has moved past its smartphone ambitions. From a report: In an interview with Wired, Microsoft's Surface head Panos Panay confirmed that the company is working on new form factors. When questioned about whether this would include a new Surface Phone, Panay stated that the Surface Phone was not one that they are thinking about at this time. "I wouldn't say that it includes a Surface Phone," Panos answered in the interview. "I think you have to think about where is that unmet need when you're thinking about your product road-map," he replied. "Of course, we're always inventing, of course, we're thinking about new form factors," Panos added. "The way people will communicate in the future will change. The form factors will wrap around that. And so when you say the phone form factor changes, I would flip it a little bit and say that communication changes." Read more of this story at Slashdot. (Comment on this)
11:00p	Apple Won't Replace Faulty MacBook Pro Keyboards With Third-Gen Components After determining that a "small percentage" of 2015-2017 MacBook and MacBook Pro keyboards may experience sticky keys, Apple initiated a Keyboard Service Program. The company has been servicing affected keyboards for free, but the fix doesn't guarantee the problem won't emerge again. The new 2018 MacBook Pros feature third-generation keyboards that are intended to prevent the keys from getting stuck. "For this reason, some customers have been hoping that Apple will start swapping out second-generation keyboards with third-generation keyboards, as part of its service program, but MacRumors has learned that isn't the plan." From the report: When asked if Apple Stores and Apple Authorized Service Providers will be permitted to replace second-generation keyboards on 2016 and 2017 MacBook Pro models with the new third-generation keyboards, if necessary, Apple said, no, the third-generation keyboards are exclusive to the 2018 MacBook Pro. Hopefully, in that case, it means that Apple has quietly tweaked the second-generation keyboard to be more reliable. It wouldn't really make sense for Apple to replace keyboards with ones that are just as prone to break again, especially if the third-generation keyboards offer a fix. One possibility is that the third-generation keyboards aren't backwards compatible with 2016 and 2017 MacBook Pro models to begin with. The keyboard is actually one part of a larger component called the "top case," which also has a glued-in battery, and the internal design could be tweaked in 2018 models. Read more of this story at Slashdot. (Comment on this)
11:40p	Things Are Going From Bad To Worse For Apple In India An anonymous reader quotes a report from Quartz: Despite its increased focus on India, Apple is all set to see a slower year-on-year growth in iPhone sales in the country in 2018. "iPhone India sales were weak in the first half of 2018, and even if they show a big jump in the traditionally strong second half, Apple will still fall short of last year," Neil Shah, research director at market analytics firm Counterpoint Research, told Bloomberg. Apple has been struggling in India for some time now. In the year ended March 2017, its revenue growth fell to 17%, compared to 53% a year ago. This six-year-low growth was mainly due to a high base and a drop in the average selling price of each phone. Apple's biggest struggle in India has been its high price points. iPhones cost between Rs35,000 ($500) and Rs80,000 ($1,100) in India, compared to the average smartphone price of $157 in the country. Amid all this, the company is seeing a massive churn in its India leadership. Last December, India head Sanjay Kaul quit after a six-year stint. The company has now reportedly lost three more of its top executives, Bloomberg reported on July 15: national sales and distribution chief, Rahul Jain; head of commercial channels Jayant Gupta, and head of telecom carrier sales, Manish Sharma. The company is also overhauling its India sales team, Bloomberg said, quoting unidentified sources. Read more of this story at Slashdot. (Comment on this)

<< Previous Day

2018/07/16 [Calendar]

Next Day >>