Нахуй тебе линукс, болезная? Под уиндоус10 вся твоя хуйня работает из коробки.

(Reply to this)

В продуктах Microsoft таких проблем не возникает.

(Reply to this)

Пока навскидку:
0. sudo apt-get install sane xsane
На случай, если у тебя из коробки драйвера не встали

1. Проверь, что сканер поддерживается хорошо по ссылке:
http://www.sane-project.org/sane-mfgs.html#Z-CANON

2. Покажи, что пишут команды lsusb и scanimage -L

(Reply to this) (Thread)

aive@aive-H81M-S1 ~ $ sane-find-scanner -v
This is sane-find-scanner from sane-backends 1.0.23

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Access to resource has been denied)
checking /dev/sg1... failed to open (Invalid argument)
checking /dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/sg4... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
could not open USB device 0x8087/0x8000 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x8087/0x8008 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x0ac8/0x305b at 003:003: Access denied (insufficient permissions)
found USB scanner (vendor=0x04a9 [Canon], product=0x2220 [CanoScan]) at libusb:003:002
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
done
aive@aive-H81M-S1 ~ $ sudo apt-get install sane
[sudo] password for aive:
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
НОВЫЕ пакеты, которые будут установлены:
sane
обновлено 0, установлено 1 новых пакетов, для удаления отмечено 0 пакетов, и 14 пакетов не обновлено.
Необходимо скачать 121 kБ архивов.
После данной операции, объём занятого дискового пространства возрастёт на 373 kB.
Получено:1 http://archive.ubuntu.com/ubuntu/ trusty/universe sane amd64 1.0.14-9 [121 kB]
Получено 121 kБ за 0с (223 kБ/c)
Выбор ранее не выбранного пакета sane.
(Чтение базы данных … на данный момент установлено 287070 файлов и каталогов.)
Подготовка к распаковке …/sane_1.0.14-9_amd64.deb …
Распаковывается sane (1.0.14-9) …
Обрабатываются триггеры для man-db (2.6.7.1-1ubuntu1) …
Настраивается пакет sane (1.0.14-9) …
aive@aive-H81M-S1 ~ $ sudo apt-get install sane xsane
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
Уже установлена самая новая версия sane.
Уже установлена самая новая версия xsane.
обновлено 0, установлено 0 новых пакетов, для удаления отмечено 0 пакетов, и 14 пакетов не обновлено.
aive@aive-H81M-S1 ~ $ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 0ac8:305b Z-Star Microelectronics Corp. ZC0305 Webcam
Bus 003 Device 002: ID 04a9:2220 Canon, Inc. CanoScan LIDE 25
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
aive@aive-H81M-S1 ~ $ scanimage -L

(Reply to this) (Parent)

aive@aive-H81M-S1 ~ $ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
aive@aive-H81M-S1 ~ $

(Reply to this) (Parent)

Good -пишут на счет него.

(Reply to this) (Parent) (Thread)

Попробуй тупо поставить более свежий sane и перезагрузиться:

sudo add-apt-repository ppa:rolfbensch/sane-git

sudo apt-get update
sudo apt-get upgrade

и в ребут

(Reply to this) (Parent) (Thread)

он чета под конец предложил, надеюсь, я правильно делаю..
я тут редачу вяло в жарень и торможу чтоб еще понимать терминал, спасибо, добьется, ребутнусь)

(Reply to this) (Parent)

(Reply to this) (Parent) (Thread)

Ну у меня вроде также поставилось

(Reply to this) (Parent) (Thread)

ты че тестил?))
я те там диФИРАМБУ НА МЫЛО ВЫДАЛА)) С КАРТИНКОЙ))
КАПС)
ой)

(Reply to this) (Parent)

как поставит мойнкрафтэ под линусь

(Reply to this) (Parent)